Warning: You appear to be using an obsolete browser, and soon you may not be able to access our website. We strongly recommend that you upgrade your browser as soon as possible.

The History of Diamond Cuts

Rose cuts, Old European, Old Mine, and more

One of the earliest recorded statements about diamonds is: “the substance that possesses the greatest value, not only among the precious stones, but of all human possessions.” said by Pliny, the Roman historian. The story of the diamond cut is the story of humankind’s love of diamonds and our quest to unlock their true brilliance.

Before Diamond Cutting

Point cut diamond example
The Point Cut was simply a polished diamond in its natural shape

The Romans loved diamonds but did not have the technology to change their shape. So, the Romans wore uncut diamonds. One of diamond’s remarkable attributes is that the natural diamond crystal is beautiful without any human modification. Diamonds normally form in the octahedral shape which looks like two pyramids stuck together at the base.

Naturally, the first attempts to enhance diamonds were to polish the natural gem. The “point cut” is the polishing of a natural octahedral diamond. Interesting fact #1 about diamond cuts: cutting a gem is the shaping of a gem while polishing is making the facets smooth and shiny. Diamonds are cut and polished in one step. Since only diamond can cut diamond, the diamond cutter must take care to polish the gem at the same time. That is one of the reasons diamonds are expensive. Diamond cutters are highly trained and need a lot of experience to get the job done right.

The point cut diamond is likely where the tradition of the diamond engagement ring began. Mary of Burgundy became the first to receive a diamond engagement ring. Archduke Maximilian of Austria gave her a ring that was set with a point cut diamond and thin flat pieces of diamonds in the shape of an “M” in 1477.

The Earliest Diamond Cuts

Table cut single cut and rose cut old diamond shapes
The Table Cut (left), the Single Cut (middle), and the Rose Cut (right)

Once it was understood that only diamond can cut diamond the process of changing the shape of a diamond began. In the 15th century cutters would saw off part of the octahedron to create what is called a table. The table is the big center facet of a diamond. The creative name for this shape is the Table Cut.

By adding more facets to the diamond crystal the single cut diamond was born. The Single Cut diamond is one of the earliest and most basic of cuts. It has an octagonal girdle (the side edge of the diamond) with a table and eight crown (top part of the diamond) facets plus eight pavilion (the bottom part of the diamond) facets plus a culet (the point at the bottom of the diamond). Diamonds have gone from one facet (the table) to 18 facets. This cut started to unlock the brilliance within the diamond, and variations of it are still used today.

Another early diamond cut is the rose cut or rosette cut. The rose cut looks like half a diamond to modern eyes. It has anywhere from 3 to 24 facets coming to a point in the middle. But its most recognized aspect is the flat bottom. Basically, it is a crown without a pavilion.

Interesting fact #2: Some diamond cuts do not have a standard number of facets. As we have just seen the rose cut has many variations. A 3 facet rose cut looks a lot different than a 24 facet rose cut. Some cuts can vary by multiple facets and still be considered properly cut. With other cuts even changing 1 facet would result in the diamond being labeled a miss-cut (often causing it to be sold at a discounted price). It just depends on the type of cut and where the deviation from the “standard” facet pattern is.

French cut diamond example
The French Cut was the next logical progression in diamond cutting

The next important diamond cut is the French cut. The French cut is a square or rectangular cut diamond. It appears square when viewed from above because it is based off the octahedral shape of the natural diamond. The French cut has just 9 crown facets, with the square or rhombus-shaped table facet diagonal to the square of the crown. At the four sides of the table are four triangle facets that point towards the corners of the crown. This gives the appearance of a four-pointed star. The pavilion is cut into four main facets.

Moving Towards Brilliance

Mazarin or double cut diamond example
The Mazarin cut diamond was a big step forward.

The evolution of the diamond cuts then takes a big leap with the Mazarin cut. The Mazarin cut also known as the “Brilliant en seize” or “The Brilliant in Sixteen” and also as Lisbon Cut is accepted as the first brilliant cut diamond.

Interesting fact #3: the same or almost the same diamond cut can be known by different names. This is done in the modern era is for branding and marketing reasons to increase the perceived value of the diamond. In historical times, it was most likely for national and regional reasons. The unfortunate result of this in both the past and present is that it makes diamonds that much harder to understand. That’s why we at Arden Jewelers always strive to use standard, easy to understand names instead of complicated industry jargon or marketing names. Our goal is to demystify diamonds and jewelry not add to the confusion.

The Mazarin cut has 17 facets on the crown. Yet another name for this cut is the double-cut brilliant because they have double the facets of the single cut diamond. And if double is good, then triple is even better. The Triple cut or Peruzzi brilliant cut is another adaptation. The triple cut has 33 facets on the crown.

The Old Mine and Old European Cuts

Old Mine cut diamond example
Notice the reflections of the large culet, a signature of the Old Mine
  1. Antique Diamond Ring with Filigree Accents

    Antique Diamond Ring with Filigree Accents

    $3,950.00

When most people think of old diamond cuts they think of the Old Mine cut diamond. The Old Mine cut has the same number of facets as a modern round brilliant (a total of 58). The Old Mine cut’s distinctive features are the high crown angle, small table, large culet and square rounded corner shape. The reason for the cutting style is more about sticking close to the natural diamond octahedral shape than the release of fire and brilliance we know today.

The Old Mine cut follows the angles and shape of the octahedral diamond crystal to save on weight from the rough stone and to make it easier to cut with the diamond cutting technology of the day. Old Mine cut diamonds range from almost square with rounded corners, to irregular shape, to round. Some call the irregular shape cut a crude Old Mine cut. Old Mine cut is the last cut where individual cutters took liberty with how the facets are laid out. Some look like a modern round brilliant (in layout, not in angles or shapes) and others follow a design of their own creation.

Old European cut diamond example
The Old European cut is the forerunner to the round brilliant

The Old European cut is the forerunner of the modern Brilliant Cut. The 58 facets have the same general shape, angle and layout as the modern brilliant cut. The old European cut is credited to an American cutter named Henry Morse in the late 1800’s. Why is it not known as the Old American cut instead of the Old European cut? Maybe diamond sellers at the time thought their customers would be willing to pay more for something European than they would for something American.

The Old European cut has a smaller table, higher crown angle, and a larger culet than the modern round brilliant cut. The modern round brilliant cut is designed to push its fire and brilliance up through the middle of the stone. On the other hand, the Old European cut looks less brilliant from the top down view but its fire and brilliance explodes from the sides of the crown in a dome effect.

Old European cut diamonds generally have the proper pavilion angle which is like the engine for the brilliance of a diamond. The crown, by contrast, is like a lens focusing the light show of a diamond. So, the Old European cut diamonds create the brilliance but do not concentrate the show straight up. Instead, they show it in a dome effect.

The Modern Round Brilliant Cut

Round brilliant cut diamond
The stunning modern round brilliant cut diamond.

Now, we are nearing the end of our journey through the history of diamond cuts. The modern round brilliant cut is a product of math and science. Marcel Tolkowsky analyzed diamond brilliance in the way they take white light and break it into its spectral hues and direct it to impress the wearer. Tolkowsky’s calculations serve as the basis for the modern round brilliant.

Since its creation subtle and not so subtle variations on the round brilliant have come and gone each claiming to surpass it in some way. None have captured our imagination or hearts the way the modern round brilliant has. It has been and remains the most frequently chosen diamond cut for engagement rings and other jewelry.

We hope you have enjoyed this exploration of diamond history. What’s your favorite old diamond cut? Let us know in the comments below, and stop by the shop to see real life examples of these beautiful pieces of the past and present.

What people are saying

  1. Wesley Milam says:

    Sorry to intrude upon your comment but I was going through some old bulk jewelry that I’ve had for over a year and I had only glanced through it and forgotten about it really. I’m not a collector as persay but I end up with a lot through bulk buying or trading. Anyways someone was looking through it to buy something and we noticed this loose diamond didn’t look like what I’m used to seeing. With my hobby Ive had a lot of fake diamonds and some fake ones that would pass one test perfectly or maybe two at the best but I’ve never seen one that passed every test I could find online to try like this one. Like when I did the test to see if it would cut glass it shocked me because I barely put any pressure on it and it cut it like I’ve never seen before. But I had never seen this kind of cut before, similar but not with the thicker flat border on the sides. But when I found this site trying to research it I found one that matches it exactly and that’s the old European cut. I took it to 6 stores today to get it looked at but as soon as I told them it weighed 3 carat’s and that i believed it was a diamond they all refused to look at or test it as soon as I told them that. All they said was it’s got to be fake and that’s all the info I could get. Needless to say I couldn’t sleep any tonight for thinking about how I was treated like that because I don’t look like a person that would own something that valuable which they are right it’s way above my means and like the person I got it from we didn’t even know what it really was and I only realized it by chance but they refused to even put it in their hand to even see enough of it to be able to say it’s fake. Some said that before I could get it out to show them. Sorry so long off a message any the long rant but it’s been a long day and if you would like to see it I will send pics and we’ll go from there.

  2. Kimberly Black says:

    I did enjoy reading about the diamonds. I’m trying to find as much knowledge as possible about them. I’ve had this pretty yellow vivid ring since 2002 which was my grandmama’s. I’ve thought it to be a Topaz, but after reading a lot and really studying this ring I do believe it’s NOT a Topaz. It’s rectangular in shape and when looking into the stone there’s a small rectangle at the bottom and the facets are big and they honestly look like how an Old Mine Cut Diamond would look, plus the setting is old looking and it has OB 10K inside the band. Engelhart Cornelius Ostby and Nathan B. Barton owned the jewelry business. While Østby and his daughter Helen were in France they took the Titanic back to America but that’s when Østby lost his life in 1912, Helen survived. He/They traveled looking for gems and stones, Ostby had a black doctors bag with all type of gems, stones, and other things for the business. So, with my ring, there’s no telling where it could had come from or who did the cutting by hand or how old it actually is. The setting came from his business. Back then most diamonds were coming from Brazil and India, this was before the discovery of the diamonds in South Africa. But with all my readings with what info I could get online and the inspection of this ring, it’s what I’ve come up with. It’s thanks to people like you, that put this info online for people like me, that don’t always take things as face value without doing some homework first, to read and to gain the knowledge to help me make a sound decision as to what my ring can possibly be without any testing equipment. Now I only wish for guidance going forward with my ring. Too bad there weren’t more literature on Georgian period jewelry.
    I’m sorry if I had wrote to much

    • Hi Kimberly, thanks for your comment. I’m glad you enjoyed our article! It sounds like you have a very cool ring. I would recommend getting it checked out by a jeweler; if you are local to Sacramento, we would be happy to provide this service to you. If not, find a local gemologist that can help you identify the stone and maybe tell you a bit more about your ring. Going forward we do buy jewelry, if you were interested in selling it, or we can recommend some other avenues for you to explore.

  3. Denise K Gianni says:

    Until reading this article, ‘European cut’ diamonds are my FAVORITE cut; now, American 🇺🇸 cut diamonds are my favorite!! I have two questions about them: were they hand cut and when did cutters begin using machines instead?

    • Hi Denise, good questions. Yes, European Cut diamonds were cut by hand, and in-fact even today many larger diamonds are still cut by hand (typically with the aid of some machines). A deep dive into how diamonds are cut would be a nice follow up article to this one. We will work on that in the future. However, to answer your question, machines to aid in diamond cutting started to become more available in the early 1900s.

  4. Katherine E Baker says:

    One of my favorite articles to reference when discussing cuts. Thanks! And keep them coming. 🙂

  5. Andrew says:

    I like this quick, interesting history of diamond cutting. I never thought to wonder “why” they have the shapes they do, but now I see it starts with the crystal itself.
    Will you now tell us HOW diamond cutters use diamonds to cut? Is it diamond power on a wheel? Thanks.

    • Hi Andrew, thanks for commenting. Yes, diamond cutting is a fascinating subject for sure. It would be fun to do an article on how diamond’s are cut in the future. I’ll add it to our list of ideas. In the meantime, to answer your question briefly, yes, the only substance hard enough to cut diamond is diamond. So, diamonds are cut with a diamond wheel by very skilled craftsmen.

  6. Debra says:

    Nicely explained! Good job!

  7. Kerry says:

    Very interesting! I love learning about gems and jewelry almost as much as I love wearing it!

    Thanks,
    Kerry Kuepper

What do you think?

We love feedback. If you have any questions, thoughts, or concerns about this page, please leave us a comment.
Don't worry. We won't publish your email address or spam you.